Ikegami HC-HD300, Руководство по эксплуатации

Страница: 131 / 158

115 HC-HD300 1412 VER1 (U)
6.6 Sensor defect correction.
6
T
RO
U
B
LE S
H
O
O
T
IN
G a
nd M
A
IN
T
E
N
A
N
C
E
6.6 Sensor defect correction
Some defective pixels on the sensor may occur during operation. In that case, perform the defective pixel correction (DPC:
Defective Pixel Correct) of CMOS sensor. This is effective for small defective pixel (singular pixel).
The defective pixel correction is performed every time that auto black balance is performed. The auto black balance can be
performed from camera and from OCP or MCP. The following describes a procedure to perform auto black balance from OCP.
1
Press ABB button on the operation control panel.
Note:
If there is a large defective pixel that cannot be removed by performing ABB, operate "AUTO DPC" in the engineering menu to
perform defective pixel correction.