Ikegami HC-HD300, Руководство по эксплуатации

Страница: 106 / 158

90 HC-HD300 1412 VER1 (U)
5.2 Settings from the Menu
■
ENGINEER (1/2)
Menu Item
Initial
Setting
Setting Value Description, Remarks
MENU DATA
ALL VF
AUTO DPC
―
DPC
ON ON, OFF
Turns on/off all data with defective pixel correction.
ON : Enable all data with defective pixel correction.
OFF : Disable all data with defective pixel correction.
× ×
―
DETECT MODE
WHT+BLK
WHT+BLK, WHITE,
BLACK
Sets the mode of defective pixel correction.
WHT + BLK : Simultaneously corrects white and black
defective pixels.
WHT : Corrects white defective pixels only.
BLK : Corrects black defective pixels only.
× ×
―
SAMPLE AREA SET
Sets the WINDOWS cursor for defective pixel correction. - -
―
AUTO DPC
If this item is selected, automatic detection and automatic
correction are performed for defective pixel correction.
- -
―
DPC EFFECT CHK
OK OK, CANCEL
You can check the correction of defective pixels in all
setting ranges.
- -
―
DPC CLEAR
OK OK, CANCEL Deletes all correction data for defective pixel correction. - -
―
SAMPLE GUIDE LINE
ALL ON
ALL ON, H ON, V ON,
ALL OFF
Selects display/hide and types of auxiliary line on
WINDOWS cursor in "SAMPLE AREA SET".
○ ×
AREA SELECT SPEED
FAST FAST, NORMAL
Sets the moving speed of WINDOWS cursor in "SAMPLE
AREA SET".
× ×
FIBER SINGLE MODE CONT
Supplies power from DC connector of adapter when BS/
CCU is connected. In this case, stops power supply from an
optical cable.
SINGLE MODE
OFF ON, OFF
If it is sets to "ON," the mode is switched to the single fiber
mode.
○ ×
CAMERA ID SETUP
―
PROGRAM NO.
1 1 to 99, OFF
You can set the camera No. at the time of program operation,
etc.
If the camera No. is set on the operation control panel side,
the ID No. that has been set is displayed.
Reversely, if the camera No. is set on the camera side, the ID
No. that has been set is displayed on the operation control
panel.
× ×
ID NO.
1 1 to 40
Sets ID No. of camera. Sets this when you want the camera
No. to be detected and displayed on the BS/CCU side.
× ×
MATRIX PRESET DATA
―
MATRIX 1
Destination
setting
OFF, SMPTE, EBU,
ITU-709,
(USER1, USER2)
Selects the preset of color matrix.
* In order to select USER1 and 2, you must turn on
"MATRIX USER1(2) DATA SET - DATA SET MODE".
○ ×
―
MATRIX 2
Destination
setting
OFF, SMPTE, EBU,
ITU-709,
(USER1, USER2)
○ ×
MATRIX 3
Destination
setting
OFF, SMPTE, EBU,
ITU-709,
(USER1, USER2)
○ ×
MATRIX USER1 DATA SET Sets the preset (USER1) of color matrix.
―
DATA SET MODE
OFF ON, OFF
ON : Sets the preset data.
OFF : Does not set the preset data.
- -
―
R-G
0.0 -100 to +100 Sets the matrix of R-G. ○ ×
―
R-B
0.0 -100 to +100 Sets the matrix of R-B. ○ ×
―
G-R
0.0 -100 to +100 Sets the matrix of G-R. ○ ×
―
G-B
0.0 -100 to +100 Sets the matrix of RG-B. ○ ×
―
B-R
0.0 -100 to +100 Sets the matrix of B-R. ○ ×
―
B-G
0.0 -100 to +100 Sets the matrix of B-G. ○ ×
DATA CLEAR
--- READY
READY : Normal status
PUSH SET → CLR : Clears the preset data.
CANCEL : Exit "DATA CLEAR" without clearing
the settings.
- -