Ikegami HC-HD300, Руководство по эксплуатации

Страница: 102 / 158

86 HC-HD300 1412 VER1 (U)
5.2 Settings from the Menu
■
MENU (3/4)
Menu Item
Initial
Setting
Setting Value Description, Remarks
MENU DATA
ALL VF
SCAN FORMAT SELECT
SCAN MODE
Destination
setting
1080I59, 720P59,
1080I50, 720P50
Selects the camera operation format.
* If BS/CCU is connected, the format on the BS/CCU side
and the operation format will be the same.
× ×
CPU SYSTEM CONTROL
―
SEMI SELF MODE
ON ON, OFF
ON : Will hold settings made by the operation control
panel when the panel is disconnected.
OFF : Will default back to camera head settings when
operation control panel is removed.
○ ×
SEMI REMOTE MODE
OFF ON, OFF
ON : Allows GAIN, AWB, and SHUTTER/SUP-V to be
set at the camera head when connected to a base
station.
OFF : Disables these functions at the camera head when
connected to a basic station.
○ ×
AUTO IRIS SET
―
IRIS SET MODE
OFF ON, OFF
ON : Enables auto-iris operation setting.
* If set to ON, the iris adjustment from the operation control
panel is disabled.
× ×
―
IRIS LEVEL SET
0 -100 to +100
Adjusts the convergence level of auto iris.
Shoot the registration chart with the camera and adjust the
value so that the video level becomes 75%.
× ×
―
PEAK RATIO SET
-70 -100 to +100
Shoot the gray scale chart with the camera and adjust the
value so that the video level is 100%.
Set the exposure for a bright area in the "+" direction and
for a dark area in the "-" direction. The default value "50"
indicates no exposure compensation.
× ×
―
IRIS GAIN
50 1 to 100
Sets the auto-iris response sensitivity characteristics.
The auto-iris operation sensitivity is such that "1" is low and
"100" is high.
Hunting tends to occur more often as the value goes up.
(Set it to the default value"50" as long as hunting is not
occurring).
× ×
―
IRIS SPEED
50 1 to 100
Sets the response speed characteristics of the auto-iris.
The auto-iris speed becomes slower for "1" and faster for
"100".
○ ×
―
IRIS LIMIT
F22 F22, F20, F18, F16
If the iris is about to close during auto-iris operation, it stops
the iris operation before it completely closes to prevent iris
hunting.
Sets the iris limit value at that time.
○ ×
LENS ADJUST
OFF F16, F2.8, OFF
Sets the output of control voltage for fixed iris value during
lens adjustment. To adjust the relationship between the lens
control voltage value and lens iris value, the control voltage
equivalent of F2.8 and F16 can be output to the lens.
× ×
AWB/ABB MODE
―
AWB WITH A.IRIS
OFF ON, OFF
Select whether A.IRIS is automatically input or not when
executing AWB.
* This menu is only valid during self-operation. It is always
OFF during BS/CCU operation.
○ ×
―
SMOOTH AWB
ON-0.5s
ON-0.3s, ON-0.5s,
ON-0.7s, ON-1.0s,
ON-1.5s, ON-2.0s,
OFF
Switches Ach/Bch of AWB smoothly.
Transition time of swtching can be set.
○ ×
―
AWB REFERENCE
ON ON, OFF
ON : Converges the AWB convergence value to EXT AWB
REF.
OFF : Makes Rch/Bch correspond to Gch.
○ ×
―
REFERENCE SET
ABB ABB, AWB Creates convergence value of AWB and ABB
*3
× ×
AUTO WHITE SHADING
--- SET → START
Executes AWS(Auto White Shading).
Makes Rch/Bch correspond to Gch White Shading. You must
shoot a uniformly lit white surface.
- -