Ikegami HC-HD300, Руководство по эксплуатации

Страница: 97 / 158

81 HC-HD300 1412 VER1 (U)
5
CAMERA SETTINGS and ADJUSTMENT
5.2 Settings from the Menu
Menu Configuration and content
The following lists the camera menu configuration.
■ MENU (Simple Menu)
The simple menu is the same as MENU (1/4) described below. Refer to items in MENU (1/4) for details of each menu.
■
MENU (1/4)
*1
Menu Item
Initial
setting
Setting value Description, Remarks
MENU DATA
ALL VF
VF DISPLAY
―
DISPLAY MODE
2 OFF, 1, 2
1 : Only the markers are constantly displayed.
Information related to characters is displayed for
2 seconds during function operation and when
changing parameters.
2 : The markers and characters are displayed at all times.
OFF : The markers and characters are constantly OFF, and
only the warning messages are displayed.
○ ○
―
MARKER/CHAR LVL
100 0 to 100
Sets the brightness levels of the markers and characters. The
brightness level gets dark in the direction of "1".
○ ○
―
FRAME MARKER
OFF
ON-16:9, ON-14:9,
ON-13:9, ON-4:3, OFF
Sets the frame marker. ○ ○
―
VF ASPECT
16:9 16:9, 4:3 Sets the VF aspect ratio. ○ ○
―
SIDE MASK
OFF
OFF, ON-4:3,
ON-13:9, ON-16:9
Sets the side mask.
○ ○
―
CONTRAST
50 0 to 100 Adjusts the side mask contrast level. ○ ○
―
BRIGHT
60 0 to 100 Adjusts the side mask brightness level. ○ ○
―
SAFETY AREA
ACTION ACTION, TITLE
ACTION : Area marker of 93% of the screen height and width.
TITLE : Area marker of 89% of the screen height and width.
○ ○
―
SAFETY MARKER
ON-16:9 ON-4:3, ON-16:9, OFF Sets the safety marker. ○ ○
― CENTER MARKER
TYPE1
TYPE1, TYPE2, TYPE3,
OFF
Sets the center marker.
○ ○
―
FOCUS INDICATE
ON ON, OFF Only active when using the serial lens. ○ ○
―
ZOOM INDICATE
ON ON, OFF Only active when using the serial lens. ○ ○
―
AUTO VF ASPECT
OFF ON, OFF
Switches the VF aspect ratio in linked motion with the output
mode of the BS/CCU down converter.
○ ○
Overlaps the striped pattern signal on the image if the image
level has exceeded the individual DETECT LEVELS. The
zebra indicator goes ON/OFF with the VF special switch.
-Zebra 1 signal : Fine, slanted striped pattern signal flowing
toward the upper right of the screen.
*Use to control the tone of the entire screen.
-Zebra 2 signal : Thick, slanted striped pattern signal
flowing to the lower right of the screen.
* Used for controlling the tone of the
subject, such as face tone, etc
ZEBRA INDICATOR
―
ZEBRA1 DETECT
100% 30 to 109% Sets the DETECT LEVEL of the 1st zebra indicator. ○ ○
―
ZEBRA2 IND
OFF ON, OFF Selects whether there is a 2nd zebra indicator or not. ○ ○
―
ZEBRA2 DETECT
70% 30 to 109% Sets the DETECT LEVEL of the 2nd zebra indicator. ○ ○
ZEBRA IND LVL
78 1 to 100 Adjusts the overlap level of the zebra indicator. ○ ○
Adjusts the overlap amount of the VF image focusing edge
signal (VF DTL).
VF DTL
―
BOOST FREQ
10MHz
10MHz, 15MHz, 18MHz,
18MHzWIDE
Selects the frequency to be boosted. ○ ○
―
NOISE SUP
5 0 to 10 Sets the removal level of the noise signal. ○ ○
―
VF DTL
35 0 to 100
Sets the VF detail amount. The detail amount decreases in
the direction of "0" and increases in the direction of "100".
○ ○
V FILTER
OFF ON, OFF Turns on/off the filter of VF DTL. ○ ○
VF MODE
―
COLOR VF MODE
AUTO AUTO, ON
AUTO : Automatically recognizes the color VF to convert
the VF VIDEO signal to R/G/B output.
ON : Makes the VF VIDEO signal output R/G/B.
○ ○
―
VF VIDEO SELECT
Y
(
*2
R/G/B)
Y, R, G, B, R+G+B,
(R/G/B)
Sets the VF image output.
R/G/B can be set in case the color VF is mounted or when
the COLOR VF MODE is ON.
○ ○
FRONT TALLY
ENABLE ENABLE, DISABLE Sets active/inactive for VF FRONT TALLY.
○ ○