Ikegami HC-HD300, Руководство по эксплуатации

Страница: 76 / 158

60 HC-HD300 1412 VER1 (U)
4.3 Turning ON Power
4.3 Turning ON Power
The procedure for turning the power ON/OFF depends on how power is supplied to the camera. This section explains how to
supply power from an AC Adapter (External power) and the BS.
Power Supply from AC Adapter
Before turning the camera ON, make sure that the POWER switch on the AC Adapter is ON and the POWER indicator lights.
Reference:
Refer to
"3. INSTALLATION and CONNECTION [Power Supply from AC Adapter]" (P49)
for how to connect the camera to the
AC pack and how to turn the power ON.
1
Set the POWER switch on the camera to EXT.
Power will be supplied to the camera, and the POWER indicator will light in green.
Power Supply from BS
Before turning the camera ON, set the switches to the following positions in normal operations. The power is turned ON/OFF by
the MAIN POWER switch on the BS.
Switch Switch Position
Camera POWER switch BS
BS BS MAIN POWER switch OFF
HEAD POWER switch I
OCP(*) CAM POWER switch ON
(*) When OCP-10 is used, the setting for the CAM POWER switch is not necessary.
1
Turn ON the MAIN POWER switch on the BS.
The BS checks the fiber cable connection and supplies power to the camera if the cable is properly connected. The CABLE
indicator on the BS will indicate the connection status of the fiber cable.
NORMAL (green) : Lights when the fiber cable is normally connected.