Ikegami HC-HD300, Руководство по эксплуатации

Страница: 21 / 158

1
OU
T
LIN
E
5 HC-HD300 1412 VER1 (U)
1.2 Operating Systems
1.2 Operating Systems
This product is equipped with functions which interface with a control panel and a control
unit. If you use the BSF-300, this product can support not only stand-alone VTR shooting
but also various shooting styles such as studio shooting and field shooting as a system
camera.
Furthermore, you can choose and operate using various control panels connected to the BS,
for your purpose.
■ Example of Minimum Configuration of System Camera (1 camera, 1 OCP, 1 MCP)
■ Example of System Camera Configuration (Up to 8 cameras, 1 MCP)
Camera Head
BS
PM
WFM
COMM
OCP
MCP
AC ADAPTER
PM
WFM
WFM
WFM CONT
PM
DC 12V
AC
* In the case of MCP-200
Camera Head
BS-1
CSU
OCP
PM WFM
PM
WFM
COMM
BS-8
PM, WFM, COMM
WFM, COMM
PM
WFM
CONT
BS-1
BS-8
IN
OUT
PM WFM
PM
WFM
WFM CONT
COMM
MCP
Note:
For Minimum operating System,
no MCP is needed when the
OCP-10 is used.
When any MCP other than
an MCP-200 is used, AC
ADAPTER is not required.
Term:
OCP (Operation Control
Panel)
This control panel is used for
normal operation. Typically one
OCP is dedicated to one camera
chain.
Term:
MCP (Maintenance Control
Panel)
This control panel is used
for maintenance and precise
adjustment of the camera in
studio shooting. By using a
memory card, you can save the
shooting condition in memory
and make setup easy. By using a
CSU together with an MCP, you
can maintain up to 32 cameras.
Term:
CSU (Camera Select Unit)
Used when controlling multiple
cameras. With using an MCP,
one CSU can control up to 8
cameras, and contains terminals
through which video is output
on the monitor from the selected
camera.