IKA C 3000 isoperibol, Руководство по эксплуатации

Страница: 9 / 40

9
Connection to the water
NOTICE
Operatrion is only allowed with
the pressure regulating valve IKA
®
C 25!
The IKA
®
C 25 pressure regulating valve is absolutely essential on
the water faucet for operation of the calorimeter, and it must be
preset to an output pressure of approximately 1.5 bar.
The valve is installed into the line of the water connection, see
operating instruction IKA
®
C 25.
Connecting the oxygen supply
IKA
®
C 29
Connection to the mains power supply
O
2
connection tube IN
max. 4 MPa
Insert the O
2
connection tube into the calorimeter “IN“ port until
it clicks home and connect the free end to the pressure reducer,
using the adapters supplied if necessary. IKA
®
C 29. Removal
entails the same operations performed in the reverse sequence.
Note: The O
2
connection tube can be removed only after it has
been depressurised.
Check that the available mains power supply matches the mains
power supply particulars listed on the rating plate.