IKA C 3000 isoperibol, Руководство по эксплуатации

Страница: 7 / 40

7
WARNING
Pressure vessels must not be used
if they have defects which could
pose a risk to staff or third parties.
• PC-operation of one or several calorimeters (Software Cal-
Win ® )
• USB printer port is available
• Operating mode based on the isoperibolic or dynamic prin-
ciple at 22 °C or 30 °C (the beginning temperature of the
water in the inner vessel) depending on the cooling water
temperature.
Cooling water
temperature
Mode of
operation
Working mode Ambient
temperture
12 °C to 20 °C Isoperibolic 22 °C
Dynamic 22 °C
Isoperibolic 22 °C
Dynamic 22 °C
22 °C
23 °C to 27 °C Isoperibolic 30 °C
Dynamic 30 °C Isoperibolic 30 °C
Dynamic 30 °C
30 °C
• Differences between the room temperature and working
temperature have an influence on accuracy in dynamic mode;
as a result, the working temperature should always be kept
similar to the room temperature.
Transport and storage
Transport and storage conditions
The system must be protected against mechanical impact, vibra-
tions, dust deposits and corrosive ambient air during transporta-
tion and storage. It is also important to ensure that the relative
humidity does not exceed 80 %.
Unpacking
Unpacking
• Unpack the device carefully
• Any damage should be notified immediately to the shipping
agent (post office, railway network or transport company)
Scope of delivery
• Calorimeter IKA
®
C 3000 isoperibol
• C 60.1012 Organizer
• C 723 Benzoic acid
• Stylus for touch screen operation
• Mains connection cable
• Venting knob
• C 1.104 Water bath admixture
• Tool
• Double head wrench DIN 895, Spanner single SW 17,
Filter wrench
• Warranty card
• Operating instructions
The appliance must be completely emptied before storing and
transportation.
In case of repair the device has to be cleaned and free from any
materials which may constitute a health hazard..
Condenser
M 8 x 1
• Hoses:
Discharge
hose
(1.5 m)
(EMPTY)
Inflow pipe
(in)
Return pipe
(out)
O
2
connec-
tion tube
(in)