iGage
iG8 User Manual
29
Please check out the ‘
Advanced Base Configuration
’
section of this manual on Page 57 for a discussion of
configuring base positions using other methods in
SurvCE.
17.
The ‘Average GPS’ screen is shown:
A 10-second average is sufficient to get a position
for the base. Choose ‘Number of Epochs’ and enter
10 samples.
Click the green check mark.
18.
SurvCE will begin averaging GPS readings:
19.
After 10-seconds, the average position will be
shown:
Set the ‘Broadcast ID’ to a unique integer number.
In most scenarios, this ‘RTK Broadcast ID’ ends up
being a point ID in your job file.
20.
Always click on the ‘Store in Point List’ button:
A ‘Point ID’ of ‘1’ and a ‘Description’ of ‘BB’
(Broadcast Base) is reasonable. Click on the green
check mark.
Click on ‘OK’.
