APPLICATIONS
4-11
(17) At any time during the test you can press
[Summary]
then
[Source Summary]
to display the
Source Summary
screen similar to that shown in Fig. 4-15 below. This shows the allocated
frequencies and levels of both sources to confirm your selection.
Fig. 4-15 Receiver selectivity
−
source summary
(18) At the conclusion of the test, press
[EXIT]
to return to the previous screen to continue with
the application.
(19) To choose another application or to cancel the current application and return to normal
operation, press [SETUP]
.
This causes the
Setup Menu
shown in Fig. 4-16 below to be
displayed. The screen is split horizontally in two, with the upper part displaying the
application mode and the lower part displaying the application cancellation selection.
Fig. 4-16 Setup menu in application mode
(20) To choose another application press
[Appl’n Menu]
which returns you to the
Applications
Selection Menu
.
(21) To cancel the current operation but retain the combiner and coupling setups, press
[No
Appl’n (mode 1)].
To cancel the current operation but restore to the previous combiner and
coupling setups press
[No Appl’n (mode 2)].
Pressing either key returns you to the
Setup
Menu
with no application selected, as confirmed by the screen.
