ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Configurations
Programming interfaces
49
Test Ethernet via HyperTerminal
7424
►
For test purposes start a terminal program which supports the TCP/IP protocol:
e.g. [Start] > [All Programs] > [Accessories] > [Communications] > [HyperTerminal]
Info
Normally a terminal program, such as Telnet or HyperTerminal are available on every Windows
installation. If this is not so, you have to install the program subsequently:
►
Start the Windows CD and select the menu item [Software].
►
Double-click on [Communications].
> The selection menu appears.
►
Select [HyperTerminal].
►
Adopt settings and install the program.
Info
In case of doubt or problems please contact your system administrator.
►
In the terminal program you have to make various settings:
►
Name of the connection = enter
PDM360
.
►
Select a symbol (
screenshot):
►
Confirm with [OK].