99
ifm Vision Assistant O3M
UK
Colour mode [Colour map]
In the colour mode [Colour map], the colour changes with the set
reference value .
The "reference value" defines with which output of the ROI group the
"moving reference line" shifts . The following reference values can be
selected:
●
[X] - The "moving reference line" is projected in the Y-Z level and
moves with the reference value X .
●
[Y] - The projection on the floor is projected in the X-Z level and
moves with the reference value Y .
●
[Z] - The projection on the floor is projected in the Y-X level and
moves with the reference value Z .
The reference value additionally defines which provision of the ROI
group is used as basis for the projection on the floor .
The "Map type" defines the type of the colour gradient . You can
choose among the following:
●
Colour map 1
●
Colour map 1 mirrored
●
Colour map 2
●
Colour map 2 mirrored
A start and end value can be set:
●
Output of the ROI group < start value: The colour of the start value
is used .
●
Output of the ROI group > end value: The colour of the end values
is applied .
The "preview" graphically shows the set colour map in combination
with the start and end value .
The "moving reference line" shows the output of the ROI groups
graphically as a line in the projection on the floor . The "moving
reference line" can be set:
●
By activating the control field, the "moving reference line" is shown .
●
By clicking on the colour field, the colour of the "moving reference
line" can be changed .
