background image

115

ifm Vision Assistant O3M

UK

12.3.4  Reference value for min/max

With "Reference value for min/max", the output value is limited by only providing certain values in relation 

to the reference value . 

The "reference value for min/max" refers to the set result type (→ „12.3.2 Result type“) and output value 

(→ „12.3.3 Output value“).

One pixel contains four values: x, y, z and amplitude . 

The following reference values can be set

 

[Independent]

 

[x]

 

[y]

 

[z]

 

[Amplitude]

Example:

 

Set result type: "min"

 

Set output value: "absolute min"

 

Set reference value for min/max:"x"

The values of a pixel whose x-value is minimal is provided .

Example:

 

Set result type: "min"

 

Set output value: "absolute min"

 

Set reference value for min/max: "independent"

The minimum values are provided without any assignation to the pixel .

Example:

 

Set result type: "min"

 

Set output value: "absolute min"

 

Set reference value for min/max: "y"

One pixel contains four values: x, y, z and amplitude . The following pixels are available as 3D data:

Pixel

x

y

z

Amplitude

1

1

2

3

1000

2

2

1

5

580

3

1 .5

3

1

2030

The pixel 2 is provided since the reference value is set to "y" and only the absolute min values are 

considered .

Содержание O3M150





























































































































































































Отзывы: