13
UK
10.4 Changing a stored parameter set
1
►
Apply operating voltage
> Initial display is shown
Sensor type (running display)
2
►
As soon as the running display ap-
pears: press [Mode/Enter] briefly
> [EDIT] is displayed
3
►
Press [Set] for 5 s
> The first menu item is displayed
(here [SP1]).
4
>
Carry out the parameter setting (→ 10.2).
This operation can only be carried out if no sensor is connected
If for the data set stored in PP2001 only the copy functions are supported,
the editing function is not active After step 2 ([Mode/Enter] pressed
briefly), [TYPE] and the sensor type are displayed (running display).
Timeout:
If no button is pressed for 15 s, the unit returns to step 2 A parameter change
which has not been acknowledged is not adopted