15
UK
10.6 Remote display / remote evaluation
After connection of a sensor and initialisation (→ 10.1) the current measured value
is diplayed The output signals of the sensor are transmitted and provided at the
output of the PP2001
Reading of the set parameters
►
Press [Mode/Enter] briefly: the parameters are displayed one after the other
►
Press [Set] briefly: the corresponding parameter value is displayed for about 15
s After another 15 s the unit returns to the Run mode
Error messages
[SC1]
Short circuit in OUT1 of PP2001*
[SC2]
Short circuit in OUT2 of the connected sensor (signalled via the communication
interface to PP2001).*
[SC]
Short circuit in both outputs*
*The output concerned is switched off as long as the short circuit exists
These messages are displayed even if the display is switched off