11
UK
• With this parameter setting only the parameter set of the sensor is
changed The parameter set stored in PP2001 remains unchanged
• Do not activate the action point [SEND] This would cause the param-
eter set stored in PP2001 to be transferred to the sensor
• If [SLoc] is displayed when attempting a modification of a parameter
value, the sensor is locked via FDT software This locking can only be
removed via FDT software
• Change from menu level 1 to menu level 2:
►
Press [Mode/Enter] until [EF] is
displayed
.
►
Press [Set] briefly
> The first parameter of the sub-menu
is displayed (here: [HI]).
• Locking / unlocking
The sensor can be locked electronically to prevent unintentional settings
►
Make sure that the unit is in the
normal operating mode
►
Press [Mode/Enter] + [Set] for 10 s
> [Loc] is displayed
During operation: > [Loc] is briefly displayed if you try to change parameter values
For unlocking:
►
Press [Mode/Enter] + [Set] for 10 s
> [uLoc] is displayed
On delivery: unlocked
• Timeout:
If no button is pressed for 15 s during parameter setting, the unit returns to the operat-
ing mode with unchanged values