5
UK
• It permits modification of the current parameters of the sensor
• The unit has a rewriteable read-only memory It can store the parameter set of
a sensor and transmit it to other sensors of the same type by means of simple
actions (COPY and SEND).
• A stored parameter set can be changed and stored again as desired
They provide the unit with the following operating options :
•
Remote parameter setting of sensors (→ 10.2).
•
Fast programming / series programming (→ 10.3 / 10.5).
•
Changing a stored parameter set (→ 10.4).
•
Remote display / remote evaluation (→ 10.6).
6 Installation
For stationary operation two types of installation are possible:
Fixing with mounting clamp
Fixing with mounting bracket
A: mounting clamp (to be ordered sepa-
rately as accessories; order no. E10077).
A: mounting bracket
Diameter of the bore hole: 18520 mm
► Loosen the threaded sleeve (B).
►
Insert the unit in the bore hole
►
Screw the sleeve and tighten firmly
7 Electrical connection
7.1 Offline operation
Operation outside the production plant
► Connect 24 V power supply to PP2001 (plug A).
► Connect the sensor to PP2001 (socket B) via the supplied connection cable.