9
UK
10 Operation
10.1 Connection of a sensor / initialisation
1
►
Connect the sensor to PP2001
►
Apply operating voltage
> Initial display is shown
Sensor type (running display)
2
> The current measured value is
displayed
PP2001 and sensor are operational
Notes:
• If only [COPY] and [SEND] are active in the operating mode, the connected
sensor does not support the parameter setting and editing functions
Only the evaluating function (Transmission of the output signals, → 10.6) and
the copy functions (→ 10.3 and 10.5) are supported.
• If the sensor is disconnected, a running display indicates the type of the stored
data set Then [EDIT] is displayed
•
If another sensor is connected, the initialisation (step 1) starts again.
Error messages
[ECOM] Input output error: communication error / data transfer disturbed
[EINI]
Communication error or data error; initialisation / support of the sensor not
possible