SmartPLC SafeLine with PROFIBUS slave interface
198
Table: Master flags
41664
Bits 4...7 of the first byte of the digital input data contain the master flags. They provide information on
the operating state of the AS-i master.
Bit 7
Bit 6
Bit 5
Bit 4
CODESYS-Standard-SPS
has started and at least
one application is active
Configuration error in the
AS-i system
No AS-i slave detected
Peripheral fault
The bits 4...7 of the 1st byte of the digital output data contain control information for the diagnostic
data:
Bit 7
Bit 6
Bit 5
Bit 4
reserved
reserved
Reset stored diagnostic data
Activate transfer of the stored
diagnostic data
