IEMCA SMART 316, Руководство по эксплуатации и техническому обслуживанию

Страница: 79 / 166

6 - USE AND OPERATION SMART316
EN
6 - Pag. 5 / 20
6.2 DESCRIPTION OF KEYBOARD CONTROLS
1 Multifunction
- To select manual mode.
- To set the numerical value.
2 Multifuntion
- To select automatic mode.
- To activate one "step by step" operating
cycle mode: whenever the button is pressed
one step is performed.
- To set the numerical value.
3 Multifunction
To select the semi-automatic mode.
- Press the button to select the mode and
press again to delesect it.
- To set the numerical value.
4 Multifunction
- To open the guide channel in manual.
- To set the numerical value.
5 Multifunction
- To close the guide channels in manual.
- To set the numerical value.
6 Multifunction
- To open and close the clamps in manual. Press to close and press again to open.
- To set the numerical value.
7 Multifunction
- To reset the "BAR FEEDER ZERO SETTING" of the carriage.
- To set the carriage movement motor.
- Axis setting description (see Paragraph 2.1.1).
- To set the numerical value.
8 Multifunction
- To move the bar pusher at rapid speed in manual.
- To set the numerical value.
9 Multifunction
- To move the bar pusher at rapid speed in manual.
- To set the numerical value.
10 Multifunction
- To set the numerical value.
- To recall the selection cursor.
11 Multifunction
- To page up.
- To move the selection cursor upwards.
12 Multifunction
- To stop the selection function.
- To restore the value before the non confirmed modification.
13 Multifunction
- To select previous parameter
- To move the selection cursor leftwards.