IEMCA SMART 316, Руководство по эксплуатации и техническому обслуживанию

Страница: 25 / 166

2 - TECHNICAL INFORMATION SMART316
EN
2 - Pag. 17 / 20
2.7 FITTINGS - FOREWORD
To improve the feeder performance and increase its versatility, the following optional device is
available:
2.7.1 Anti-vibration device - Description
2.7.1 Anti-vibration device - Description
It is attached to the front part of the bar feeder.
Its function its to reduce bar vibrations to a
minimum, by keeping the bar centered during
rotation through two half bushes A.
In many cases, this device can be used (by simply
adjusting the diameter of the half bushes) to
greatly extend the range of diameters which can
be machined without having to replace the guide
channel.
Operation
• When the bar is dropped into the guide
channel, the two half bushes are open.
• Closure is controlled by a pneumatic cylinder after the feeder has completed the bar feeding
cycle. Closure also controls lubricating oil flow for lubrication and machined bar support
purposes.
• When the bar-pusher approaches the device, the half bushes open up to allow its passage;
oil flow is then discontinued.