NAS-4100 NETWORK ATTACHED STORAGE SERVICE MANUAL
6.
Before save the BIOS settings, put the Firmware Recovery CD into the
CD-ROM drive. Select Save & Exit Setup to reboot. After system restarts,
the following menu will appear on the screen.
7.
Use UP or DOWN key to select the right firmware model and version to install,
and then press ENTER. A confirmation screen will appear. Press Y and ENTER
to proceed.
8.
The system will start to install the firmware, please wait for a while. After the
installation completes, the system will compare the checksum automatically
to verify. If succeeds, the system will have a continuous beep sound. If fails,
the system will make beep sound at one second interval.
Note: Be sure to check the result displayed on the screen.
IEI CONFIDENTIAL
22
