NAS-4100 NETWORK ATTACHED STORAGE SERVICE MANUAL
1.
Detach the redundant power supplies:
Loosen the screws and use the handles to pull out the power supplies.
2.
Take out the hard disks:
a.
Press on both sides of the front panel where the red arrow indicated to
unlock the side latches so as open the front panel in a downward manner.
b.
Use the keys (provided in accessory pack) to unlock the drive tray and
pull out the hard disk.
c.
Remove hard disk from the drive tray:
Unfasten the four screws on the back of the drive tray. Then plug out the
power cord and the IDE connector.
d.
Repeat step b and c to take out all the hard disks and the drive trays.
IEI CONFIDENTIAL
11
