IEI Technology eKINO-945GSE Скачать руководство пользователя страница 29

Страница: 29 / 215

eKINO-945GSE Motherboard

Page 13

The SO-DIMM socket is shown in

Figure 2-4

below.

2.4.2 Graphics

The Intel® 945GSE Northbridge chipset has an Intel® Gen. 3.5 integrated graphics

engine that supports the following display devices (shown in

Figure 2-4

Analog

CRT

LVDS

TV-Out

SDVO

ports

2.4.2.1 Analog CRT (VGA)

A DB-15 VGA connector on the external peripheral interface connector panel is interfaced

to the Intel® 945GSE graphics engine. The Intel® 945GSE internal graphics engine, with

an integrated 400 MHz RAMDAC and hot plug CRT support, supports analog CRT

monitors up to QXGA.

2.4.2.2 LVDS

A 30-pin LVDS crimp connector is interfaced to the Intel® 945GSE graphics engine. The

Intel® 945GSE internal graphics engine supports LVDS displays with the following

features:

Up to UXGA monitors with a maximum resolution of 1600 x 1200

18-bit 25 MHz to 112 MHz single-channel or dual-channel LVDS screens

CPIS 1.5 compliant LVDS screens

2.4.2.3 TV Out

An external 7-pin DIN TV output connector is interfaced to the Intel® 945GSE graphics

engine. The Intel® 945GSE internal graphics engine has the following TV output features:

Three integrated 10-bit DACs

Macrovision

support

Overscaling

NTSC and PAL formats supported

Содержание eKINO-945GSE
























































































































































































































Результаты поиска

Содержание eKINO-945GSE

Отзывы:

IEI Technology eKINO-945GSE, Руководство пользователя, Страница: 29 / 215

Результаты поиска

Содержание eKINO-945GSE

Отзывы: