Hangzhou IECHO Science & Technology Co., Ltd.
17
(Figure. 25)
Note: The knife must be adjusted again after each blade change. Hold down
the Ctrl key of the computer keyboard during manual tool setting to speed up
the cutting speed
7.7. Set milling router speed
Drag the slider of [Milling Router Setting] up and down, the
speed will change in the range of 6000rpm-60000rpm.
8. Precautions for using spindle
The main shaft is self-closed and dustproof when working, and is permanently
lubricated. Any act of adding grease and using cleaning solvents will damage the
spindle.
The tapered surface of the chuck must be kept clean and free from scratches,
otherwise the accuracy of the tapered surface of the front end of the spindle
rotor will be changed, resulting in the inability to lock the tool, resulting in
failures such as tool drop or tool breakage. The chuck must be cleaned before
installing.
After the spindle is ventilated, the sealed state can be reached, and the sealing
air flow rate is 25L/min (the sealing air pressure must be strictly controlled at
