Hangzhou IECHO Science & Technology Co., Ltd.
12
（
Figure. 17
）
Note: Normally, WINDOWS 7/10 system can automatically recognize
and install the driver. If the driver cannot be installed automatically,
you need to install the serial port driver manually, and the serial port
number will be generated after installation.
There is no need to set the serial port number when connecting the
milling tool, it can be automatically connected after startup. When using
the CutterServer software, the milling tool communication serial port
must be set first.
Note: Sycodrive software and CutterServer software
cannot be connected at the same time. Before running one of them,
you need to close the other program.
