Hangzhou IECHO Science & Technology Co., Ltd.
9
(1) In the Motor Parameter Sets column, set the spindle model according to Pic 10.
（
Figure. 10
）
The 450 milling spindle model is 4033-AC, and the maximum speed is set to
100000rpm. Click the [Load motor type] button on the page. The following prompt
pops up, indicating that the import was successful.
（
Figure. 11
）
(2) After setting the above parameters, click the [Save on inverter] button at the
bottom right corner of the main page.
（
Figure. 12
）
