IDTECK Star Finger007 страница 9 Скачать руководство пользователя

Страница: 9 / 103

p.2

Do not connect multiple controllers to a single adapter. Exceeding the capacity may cau

se abnormal heat generation or fire.

Securely plug the power cord into the power receptacle. Insecure connection may caus

e fire.

When installing the controller, fasten it securely and firmly. The fall of controller may ca

use personal injury.

Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or container

s filled with water on top of the controller. Doing so may cause personal injury due to fi

re, electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or el

ectric shock.

If any unusual smells or smoke come from the unit, stop using the product. In such case,

immediately disconnect the power source and contact the service center. Continued us

e in such a condition may cause fire or electric shock.

If this product fails to operate normally, contact the nearest service center. Never disass

emble or modify this product in any way. (SAMSUNG is not liable for problems caused

by unauthorized modifications or attempted repair.)

10.

When cleaning, do not spray water directly onto parts of the product. Doing so may ca

use fire or electric shock.

CAUTION

Do not drop objects on the product or apply strong blows to it. Keep away from a locat

ion subject to excessive vibration or magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low temperature (b

elow -30°C), or high humidity. Doing so may cause fire or electric shock.

If you want to relocate the already installed product, be sure to turn off the power and

then move or reinstall it.

Remove the power plug from the outlet when there is a lighting storm. Neglecting to d

o so may cause fire or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause fire.

Install it in a place with good ventilation.

Avoid aiming the controller directly towards extremely bright objects such as sun.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liqui

ds, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any tim

Содержание Star Finger007








































































































Результаты поиска

Содержание Star Finger007

Отзывы:

Похожие инструкции для Star Finger007

Бренды по названию

Популярные бренды

IDTECK Star Finger007, Руководство пользователя

Результаты поиска

Содержание Star Finger007

Отзывы:

Похожие инструкции для Star Finger007

Бренды по названию

Популярные бренды