IDTECK Star Finger007, Руководство пользователя

Страница: 33 / 103

p.26 System Initialization
Before mounting the Star FINGER007 unit to the Wall Mount bracket, operational
test of the unit should be completed, as the locking pins will lock the unit to the W
all Mount. Removing the unit from the Wall Mount bracket after they have been in
stalled together may cause damages to the bracket and render its effectiveness.
Insert 5 O-rings to the wall mount as indicated, then route the cable of the main u
nit through the center hole and push the main unit to wall mount to lock the main
unit and make sure that the main unit is locked with wall mount.
2 System Initialization
You have to initialize the FINGER007 unit prior to first installation.
Once power is supplied to the FINGER007, press down the initialization switch on the back
of the FINGER007 unit and then keep it more than 2 seconds, then you can see displays belo
w on the LCD. If you want initialization, press key <1> otherwise press key <0>.