IDTECK Star Finger007 Скачать руководство пользователя страница 102

Страница: 102 / 103

Template

p.95

FCC Requirements Part 15

Caution:

Any changes or modifications in construction of this device which are not expressly

approved by the responsible for compliance could void the user's authority to operate the e

quipment.

NOTE:

This device complies with

Part 15 of the FCC rules.

Operation is subject to the following two conditions;

This device may not cause harmful interface, and

This device must accept any interference received, including interference that may caus

e undesired operation.

This equipment has been tested and found to comply with the limits for a

Class A Digital De

vice

, pursuant to

Part 15 of the FCC rules

. These limits are designed to this equipment gener

ates, uses, and can radiate radio frequency energy and, if not installed and used in accordan

ce with the instructions, may cause harmful interference to radio communications.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on another circuit.

Consult the dealer or an experienced radio/TV technician for help.

Содержание Star Finger007








































































































Результаты поиска

Содержание Star Finger007

Отзывы:

Бренды по названию

Популярные бренды

IDTECK Star Finger007, Руководство пользователя

Результаты поиска

Содержание Star Finger007

Отзывы:

Бренды по названию

Популярные бренды