IDTECK Star Finger007, Руководство пользователя

Страница: 32 / 103

Installation of the Product
9
p.25
1 Template
Real size template is 16 Template in this manual. Tear off the template page and attach it to
the wall. And then follow steps below to install the Star FINGER007. (You can install the Sta
r FINGER007 directly, if the gang box is installed on the wall.)
1. Position the Wall Mount template to the location at which you want to install the unit a
nd mark two drilling (two Tap #6-32 holes) positions and then drill it
2. Drill a 1/2” hole on the center of the wall mount.
3. Using two screws, install the wall mount to the hall.
4. Take out the cable through the center hole.
5. After connecting cables, initialize the Star FINGER007. And then test basic function. (Re
fer to ‘8.2 SYSTEM INITIALIZATION’)
6. Insert O-ring at 5 positions and then insert the bundle of cable to the center hole.
7. Put the Star FINGER007 unit on the wall mount and push it until it is fixed up.