manualshive.com logo in svg

IDT PCI Express 89HPES32NT24xG2, Руководство пользователя, Страница: 8 / 744

Поделиться
Скачать
IDT PCI Express 89HPES32NT24xG2 Скачать руководство пользователя страница 8

IDT   

PES32NT24xG2 User Manual

6

January 30, 2013

Notes

July 14, 2009: Includes changes in several chapters based on recent updates in the functional specifi-

cation.

July 30, 2009: Includes changes in several chapters based on recent updates in the functional specifi-

cation.

August 28, 2009: Added Chapter 27, Usage Models.

September 18, 2009: In Chapter 2, added Table 2.5. In Chapter 4, added new sections Packet Routing

Classes and Proprietary Weighted Round Robin (WRR) Arbitration, and revised Figure 4.8. Made
numerous revisions in Chapter 8. In Chapter 10, made changes to the Action Taken column in Table 10.14.
In Chapter 12, updated the I/O Expander tables. In Chapter 15, made changes to Table 15.7 and added text
to DMA Multicast section. In Chapter 25, made numerous changes in SerDes x Transmitter Lane Control 0
and 1 registers

October 6, 2009: In Chapter 3, added text to section Switch Fundamental Rest and moved this section

in front of Boot Configuration Vector section, and added text to Switch Modes section. In Chapter 5, added
text to sections Switch Partitioning and Non-Transparent Operations. In Chapter 15, modified sections Data
Transfer and Addressing, Source Address Expired Error, and Destination Address Expired Error. In Chapter
16, added text to section Switch Signals. In Chapter 21, modified description for bit EIS in the PCIESSTS
register. In Chapter 24, modified description of RUN bit in the DMAC[1:0]CTL register. 

October 14, 2009: In Chapter 22, added WRR Port Arbitration Counts registers, and in Chapter 20,

updated Figure 20.2 and Table 20.5 to show new registers. Corrected Table 26.2, Boundary Scan Chain.

November 4, 2009: In Chapter 2, added new section Support for Spread Spectrum Clocking (SCC) with

updated tables and modified Limitations column in Table 2.6, Clock Frequency Limitations. In Chapter 5,
added three new sections: Partition State Change Latency, Port Operating Mode Change Latency, and
Partition Reconfiguration Latency. In Chapter 8, deleted all references to Slew Rate. In Chapter 10, title for
Table 10.11 was changed to Unexpected Completions instead of Unsupported Requests, and a new bullet
was added at the top of section Address Routed TLPs. In Chapter 14, modified text in Overview section and
in section Unsupported Request (UR) Error. In Chapter 15, modified text in section Reception of a Request
TLP That is Unsupported. In Chapter 19, added reference to junction temperature in the Overview section.
In Chapter 20, added new section Configuration Register Side-Effects under Overview. In Chapter 24, DMA
Channel Error Mask register, de-featured bits 2 and 17. In Chapter 25, SMBus Control register, de-featured
bit 16 (MSMBIOM).

November 23, 2009: In Chapter 4, corrected port numbers for Stack 1 in Figure 4.1.

December 4, 2009: In Chapter 10, modified text in section Error Emulation Control in the PCI-to-PCI

Bridge Function and added new section Error Emulation Usage and Limitations. In Chapter 14, modified
text in section Error Emulation Control in the NT Function and added new section Error Emulation Usage
and Limitations.

January 6, 2010: In Chapter 17, corrected references to NT Multicast Control register and NT Multicast

Transmit Enable bit in the following sections: NT Multicast TLP Routing, and Usage Restrictions. In Chapter
20, corrected Figure 20.5. In Chapter 23, NTIERRORMSK0 register, changed bits 29 and 30 to reserved. In
Chapter 24, DMAIERRORMSK0 register, changed bits 29 and 30 to reserved. In Chapter 25, changed
default values for several bits in the TMPADJA and TSSLOPE registers.

March 4, 2010: Revised manual to include references to the PES32NT24BG2 device in Chapters 1, 2,

3, 12, and 26 as appropriate and changed manual name to PES32NT24xG2.

March 8, 2010: Removed references to OUTDBELLCLR and OUTSBELLDBELLCLR registers in

Chapter 14, Non-Transparent Switch Operation.

March 17, 2010: In Chapter 8, updated Tables 8.6, 8.7, 8.8, 8.11, and 8.12. In Chapter 13, deleted refer-

ence to multiple GPIOAFSEL registers; there is only one register. In Chapter 24, deleted “other” from ECRC
Error name for bit 31 in the DMAC[1:0]ERRSTS register.

May 10, 2010: In Chapter 21, PCI Bridge Registers, the ACSCAP register offset address was corrected

to 0x324. In Chapter 23, NT Endpoint Register, revised the Description for MODE field in BARSETUP0
register and LADDR field in BARLIMIT0 register.

Содержание PCI Express 89HPES32NT24xG2









































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов