IDT PCI Express 89HPES32NT24xG2 Скачать руководство пользователя страница 283 | Manualshive

Страница: 283 / 744

IDT PCI Express 89HPES32NT24xG2 Скачать руководство пользователя страница 283

IDT Non-Transparent Switch Operation

PES32NT24xG2 User Manual

14 - 35

January 30, 2013

Notes

PCI-to-PCI bridge function of the upstream port in partition 2, and PCI-to-PCI bridge function of the down-
stream switch port in partition 2) checks for UR errors. Also, notice that the request TLP logically stops at
the PCI-to-PCI bridge function of the downstream switch port in partition 2 since this function detects the
UR error.

For this example, error logging occurs as shown in Table 14.8.

Unexpected Completion Received Error

Unexpected completion TLPs are dropped by the function that detects the error. Therefore, no other

functions in the logical path of the TLP will detect this type of error.

Poisoned TLP Received Error

Poisoned TLP errors may propagate across multiple PES32NT24xG2 ports. The following rules apply:

–

All functions in the logical path of the poisoned TLP log the error in the PCI legacy error registers.

• The PCI-to-PCI bridge function logs the error in the PCI Status (PCISTS) or Secondary Status

(SECSTS) registers as appropriate.

• The NT and DMA functions log the error in the PCISTS register.

–

The function that claims the TLP in the port that receives the poisoned TLP from the link logs the
error in its AER Capability Structure and handles it appropriately.

• A PCI-to-PCI bridge function that receives a poisoned TLP handles it as described in Table 10.9.
• An NT function that receives a poisoned TLP handles it as described in Table 14.4.
• A DMA function that receives a poisoned TLP handles it as described in Table 15.12.

Figure 14.16 shows an example of a poisoned TLP propagating across the PES32NT24xG2 during an

inter-partition transfer. As the TLP is logically routed from the downstream switch port in a first partition,
across the NTB, to the downstream switch port in a second partition, each function in the TLP’s path logs
the poisoned TLP error per the rules described above.

Function

Error Logging

Downstream PCI-to-PCI Bridge (Par-
tition 2)

Refer to row corresponding to ‘Unsupported
Request’ error in

Upstream PCI-to-PCI Bridge (Parti-
tion 2)

No error logged.

NT Endpoint (Partition 2)

Refer to row corresponding to ‘Completion with
UR status received’ in Table 14.4

NT Endpoint (Partition 1)

No error logged.

Upstream PCI-to-PCI Bridge (Parti-
tion 1)

No error logged.

Downstream PCI-to-PCI Bridge (Par-
tition 1)

No error logged.

Table 14.8 Error Logging at Each Function for UR Example # 2

«
...
281
282
283
284
285
...
»

Содержание PCI Express 89HPES32NT24xG2









































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов