IDT PCI Express 89HPES32NT24xG2 Скачать руководство пользователя страница 659 | Manualshive

Страница: 659 / 744

IDT PCI Express 89HPES32NT24xG2 Скачать руководство пользователя страница 659

IDT Switch Configuration and Status Registers

PES32NT24xG2 User Manual

24 - 11

January 30, 2013

Notes

5

LINKMODE

RO

HWINIT

Link Mode.
This field indicates the operating mode of the lanes for the
link associated with the port when the link is up. The value
of this field is undefined when the link is down.
Note that PHY link mode is not equivalent to port mode (i.e.,
a port in ‘Unattached’ mode which initially has an upstream
PHY link mode may automatically change to a downstream
PHY link mode if it link-trained with an endpoint device
using crosslink).
0x0 - (upstream) Lane(s) associated with port behave as

upstream lanes

0x1 - (downstream) Lane(s) associated with port behave as

downstream lanes

9:6

MODE

RO

HWINIT

Port Mode.
This field contains the current operating mode of the switch
port. Due to the time it takes for a partition state change to
complete, this value may be different than that of the MODE
field in the SWPORTxCTL register.
If a port is disabled due to the associated partition being
disabled, then this field indicates that the port is disabled
(i.e., the field does not simply echo back the MODE field in
the SWPORTxCTL register).
0x0 - (disable) Disabled
0x1 -(downstream) Downstream switch port
0x2 - (upstream) Upstream switch port
0x3 - (ntb) NT function
0x4 - (upstream_ntb) Upstream switch port with NT function
0x5 - (unattached) Unattached
0x6 - upstream_dma) Upstream switch port with DMA func-

tion

0x7 - (upstream_ntb_dma) Upstream switch port with NT

and DMA functions

0x8 - (ntb_dma) NT with DMA function
Others - reserved

12:10

SWPART

RO

HWINIT

Switch Partition.
For operational port modes (e.g., downstream switch port,
upstream switch port, NT endpoint, upstream switch port
with NT endpoint), this field contains the current switch par-
tition to which the port is attached. In non operational
modes (i.e., disabled or unattached), the value of this field
is undefined.
Due to the time it takes for a partition state change to com-
plete, this value may be different than that in the SWPART
field in the SWPORTxCTL register.

15:13

Reserved

RO

0x0

Reserved field.

20:16

DEVNUM

RO

HWINIT

Device Number.
When the port is configured as a downstream switch port,
this field contains the device number associated with the
port. In all other port modes, this value of this field is unde-
fined.
Due to the time it takes for a partition state change to com-
plete, this value may be different than that in the DEVNUM
field in the SWPORTxCTL register.

31:21

Reserved

RO

0x0

Reserved field.

Bit

Field

Field

Name

Type Default

Value

Description

«
...
657
658
659
660
661
...
»

Содержание PCI Express 89HPES32NT24xG2









































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов