idp SMART-81, Руководство пользователя

Страница: 96 / 104

96

Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80 card (54mm x 86mm).

The transfer roller or the printing roller is contaminated with the dust and dirt.
Remove the dust and dirt with the cleaning kit as section 6.2

Wrong printing position setting.
Please contact the local supplier

When operating temperature, static and humidity is out of the acceptable
operating limit of the printer.
Adjust the operating environment of the printer.
(3) Card is wound around feeding roller and bent while retransfer.
Open the top cover, remove Film and Ribbon cartridge, and remove the bent card. If
this problem occurred frequently, check the below things.

Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80 card (54mm x 86mm)

Retransfer temperature setting does not match the card .
Adjust retransfer temperature use CardPrinterConfig.

Wrong printing position setting.
Please contact the local supplier.

When operating temperature and humidity is out of the acceptable
operating limit of the printer.
Adjust the operating environment of the printer.
(4) An Error occurs while the card is being transferred.
Check the error message at LCD display and open the top cover and remove the
card by front buttons. If this problem occurs frequently, check the followings.

Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80 card (54mm x 86mm).
Figure 97 Printing quality trouble 1