idp SMART-81, Руководство пользователя

Страница: 77 / 104

77
(4) Batch
Batch is to repeat encoding/decoding test continuously. In the Repeat, you input the
number of repeats and click “Batch Start” , then the test is run as many times as the
number of sets. When you check “Include Card In/Out”, each time the printer brings a
card from the input hopper and performs an encoding test and ejects the card. But if not,
the encoding test will be done only by one card. At that time, if there is no card in the
printer, the printer brings a card into the printer from input hopper and repeats the
encoding test on the card, and if there is a card in the printer, the encoding test is
performed on the card repeatedly. “Card Holding” is activated when “Include Card
In/Out” is ticked. When “Card Holding” is ticked and the repeat number is set, the printer
repeats the encoding test as many times as the number set in the “Card Holding” without
ejection. When it is completed, the printer ejects the card and brings a new card into the
printer and starts testing.
In the Setting,
“Retry” is to retry the encoding test when the error occurred.
“Prompt on Error” is to display Pop up Message when the error occurred. If not, the
Error number will be counted without a message. The number of errors is displayed in the
Error section.
(5) Encoding test
Magnetic: Magnet Stripe Encoding
“Read” is to read and display the data from magnetic stripe card. It is composed of
“Do Read” and “Read All Buffer” and runs “Do Read” and “Read All Buffer”
sequentially.
“Do Read” is to read the data from magnetic stripe card and store the data in the
buffer.
“Read All Buffer” is to transmit the date stored in the buffer to PC. If the track number
is ticked, the data of the ticked track is only transmitted to PC.
“Write” is to write the data to the magnetic stripe. It is composed of “Write All Buffer”
and “Do Write” and runs “Write All Buffer” and “Do Write” sequentially.
“Write All Buffer” is to transmit the data to the buffer.
“Do Write” is to write the data stored in the buffer to the magnetic stripe of card. You
can choose the magnetic foil type (LoCo or HiCo) and the track of magnetic stripe.
“Random Fill” is to create a random magnetic encoding data for testing.