IDK MSD-72 Series Скачать руководство пользователя страница 68

Страница: 68 / 150

MSD-72 Series User’s Guide

If automatic measurement execute only strating position changes it shows “NORMAL END”, and if the active

area is changed by “NORMAL MODE” or if you set aspect ratio from “NEXT ASPECT” or directly it shows

resolution which is set.

[IN6 AUTO SETUP]
1024x 768 60.00Hz

If there is no input signal on the input channel it shows “NOT AVAILABLE NOW” on the front VFD screen.

Press the “MENU/SET” key to perform automatic measurement.

Note:

In case the aspect ratio does not match or video is displayed on the position far from the correct position, set

the input timing in,

“9.6.2 The total number of horizontal dots”

“9.6.3 Start position”

, and

“9.6.4 Active

area”

■

Operation from input channel selection key

You can execute the automatic measurement not only from this menu but also by pressing an input selection

key for 2 seconds or longer. By pressing an input selection key for 2 seconds, the auto measurement mode

with “NORMAL MODE” will be enabled. After that, pressing the same key for 3 seconds or longer, the auto

measurement mode with “NEXT ASPECT” will be enabled. (This auto measurement mode can be enabled

also by pressing the input key for 5 seconds or longer continuously.) Once you perform the function, from the

next time, it can be performed simply by pressing the key without pressing it for several seconds. This mode

can be canceled 5 seconds after the last auto measurement is executed.

Input channel selection key

・

IN8 or IN9 key (if IN8 and IN9 are analog)

【

See: 9.5.5 Selecting signal of DVI input connector

】

2 sec.

5 sec.

7 sec.

2 sec.

5 sec.

2 sec.

Terminates if no operation is

performed for 5 seconds

Automatic measurement starts if you press the

key within 5 seconds.

Automatic measurement starts

(NEXT ASPECT)

Automatic measurement starts

(NORMAL MODE)

Pressing and holding the

key

[Figure 9.15] Automatic measurement using input channel selection key

Содержание MSD-72 Series























































































































































Результаты поиска

Содержание MSD-72 Series

Отзывы:

IDK MSD-72 Series, Руководство пользователя, Страница: 68 / 150

Результаты поиска

Содержание MSD-72 Series

Отзывы: