MSD-72 Series User’s Guide
141
Item
Description
Output
Video
HDMI / DVI
4 outputs
HDMI Deep Color (*1) / DVI 1.0
TMDS single link, HDCP 1.4 / 2.2
Connector: Female HDMI Type A (19-pin)
Format
VGA / SVGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA /
WXGA (1360x768) / WXGA (1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ /
VESAHD / WUXGA / QWXGA / WQHD / WQXGA
*For VESAHD / WUXGA / QWXGA / WQHD / WQXGA, only Reduced Blanking is supported.
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (3840 x 2160) / 4K (4096 x 2160)
Audio
Digital
4 outputs
Multi-channel linear PCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Connector: Female HDMI Type A (19-pin)
Analog
4 outputs
Stereo L/R balanced / unbalanced
Output impedance: 100
Ω balanced / 50 Ω unbalanced
Reference level: -10 dBu, Max. output level: +10 dBu
Connector: 5-pin terminal block
Maximum
extension distance
Digital Input
1080p@60: up to 98 ft. (30 m), 4K@60: up to 39 ft. (12 m) (*3)
Digital output
1080p@60: up to 98 ft. (30 m), 4K@60: up to 39 ft. (12 m) (*3)
Functions
Analog video
processing unit
3D Y/C separation
Scan Converter
I/P conversion, Aspect Ratio Control, Picture adjustment (brightness, contrast, display position,
display size, etc.), Seamless Switching (*4)
Others
All function setting through browser, Automatic input detection and switching,
Volume adjustment (volumes of input and output ports can be set separately),
Lip Sync (Max. 16 frames), Audio breakaway enables independent audio and video switching,
Cross-point memory (9 settings), Preset memory (8 settings and startup settings), Last memory,
Anti-Snow (*5), Connection Reset (*6), External control commands (32 commands), Security lock
External control
RS-232C
2 ports / 3-pin terminal block
LAN
1 port / RJ-45 10Base-T / 100Base-TX (Auto Negotiation), Auto MDI / MDI-X
Contact closure
9 ports / 6-pin terminal block Non-voltage contact input up to DC 24 V 500 mA
External control
RS-232C, LAN, contact closure, PJLink (class1), CEC (power control of sink device) (*7)
General
Power
100 - 240 VAC ± 10%, 50 Hz / 60 Hz ± 3 Hz
Power consumption
MSD-7201UHD / MSD-7201UHDTB: About 69 W
MSD-7202UHD / MSD-7202UHDTB: About 87 W
MSD-7203UHD / MSD-7203UHDTB: About 107 W
MSD-7204UHD / MSD-7204UHDTB: About 126 W
Dimensions
MSD-7201UHD / MSD-7202UHD / MSD-7201UHDTB / MSD-7202UHDTB:
16.9 (W) × 3.5 (H) × 13.8 (D)” (430 (W) × 88 (H) × 350 (D) mm)
(EIA 2U high, full rack wide) (Excluding connectors and the like)
MSD-7203UHD / MSD-7204UHD / MSD-7203UHDTB / MSD-7204UHDTB:
16.9 (W) × 5.2 (H) × 13.8 (D)” (430 (W) × 132 (H) × 350 (D) mm)
(EIA 3U high, full rack wide) (Excluding connectors and the like)
Weight
MSD-7201UHD / MSD-7201UHDTB: 13.9 lbs. (6.3 kg)
MSD-7202UHD / MSD-7202UHDTB: 14.6 lbs. (6.6 kg)
MSD-7203UHD / MSD-7203UHDTB: 17 lbs. (7.7 kg)
MSD-7204UHD / MSD-7204UHDTB: 17.6 lbs. (8.0 kg)
Temperature
Operating: 32°F to 104°F (0°C to +40°C)
Storage: -4°F to +176°F (-20°C to +80°C)
Humidity
Operating / Storage: 20% to 90% (Non Condensing)
*1
30 bit / pixel (10 bit / component) Deep Color is supported while x.v.Color, 3D, ARC and HEC are not supported.
WQHD, WQXGA, and 4K format: 24 bit / pixel (8 bit / component) is supported.
*2
4K format: Only CEA-861 timing is supported.
*3
The maximum cable distance varies depending on the connected devices and was measured under following conditions:
・
1080p@60: when IDK’s AW G 24 cable was used and signals of 1080p@60 24 bit / pixel (8 bit / component) was input or output.
・
4K@60: when IDK’s 18 Gbps supported cable was used and signals of 4K@60 24 bit / pixel (8 bit / component) was input or output.
The maximum cable distance depends on the connected devices. The distance may not be extended with some device combinations, cabling method, or other manufacturer’s
cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
*4
Seamless switching with a black frame.
*5
The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow
noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
*6
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the
Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were
physically disconnected and reconnected. This feature only works for the MSD’s output. If other devices are connected between the MSD’s output and sink device, this feature
may be invalid.
*7
The sink device must support CEC. Some sink devices cannot be controlled from the MSD through CEC.
