IDK MSD-72 Series Скачать руководство пользователя страница 146

Страница: 146 / 150

MSD-72 Series User’s Guide

146

●Audio input
Audio is not output.

If audio is not output, first check the error code in “

9.16.9 Sink

device status (P.136)

”. (The MSD has multiple output connectors.

Find the error code of the output connector that does not output

audio.)

・

Error code 1:

Set

“

9.8.2 Output mute (P.81)

” to “OFF”.

・

Error code 2:

Ensure that the source device is connected and powered on.

・

Error code 3:

Signal is not input. Check [14], [15], [17] and [18].

・

Error code 4:

There may be problems in the source device side or HDCP

authentication. Check [14].

・

Error code 5:

If the display device or AV amplifier does not support HDCP,

only audio without content protection (such as analog input) is

output; audio is not output when signal with content protection

is input.

Some HDMI/DVI devices check if the connected device is

HDCP compliant and determines whether to output HDCP

signal or not. Since the MSD is HDCP compliant, audio may

not be output if the MSD is connected to a sink device or AV

amplifier that does not support HDCP. In this case, disable

HDCP input from the input device in “

9.5.2 Setting HDCP

input (P.62)

”.

・

Error code 6:

There are problems in the source device.

・

Error code 7:

LCD monitors may not output compressed audio, such as

Dolby Digital, DTS, and so on. If playing contents with

compressed audio (such as Blu-ray disc), check the audio

output setting. Audio signal that is output from the source

device can be controlled by setting EDID.

・

Error code 8:

Enable the target audio output connector by setting “

9.8.7

Audio output connector (P.83)

”.

・

Error code 9:

Set “

9.7.1 Output mode (P.73)

”

to a mode other than “DVI

MODE”. If the sink device does not support HDMI signal, the

MSD outputs DVI signal automatically. Check which signal type

is supported by the sink device.

・

Error code A:

Set “

8.2 Selecting input channels (P.29)

”

“

OFF”.

・

If any error code is not displayed:

Check [14] to [18]. The source device may not be outputting

audio.

Содержание MSD-72 Series























































































































































Результаты поиска

Содержание MSD-72 Series

Отзывы:

IDK MSD-72 Series, Руководство пользователя, Страница: 146 / 150

Результаты поиска

Содержание MSD-72 Series

Отзывы: