IDK MSD-72 Series Скачать руководство пользователя страница 76

Страница: 76 / 150

MSD-72 Series User’s Guide

9.7.9 Deep Color

Menu Top

→

OUTPUT SETTING

→

DEEP COLOR OUTPUT

Setting for Each output channel

Setting value 24-BIT COLOR [Default], 30-BIT COLOR

You can select the color depth of HDMI signal.

“30-BIT COLOR”: signal is output with “30-BIT COLOR” only if a sink device supporting Deep Color is

connected. If a sink device that does not support Deep Color is connected, signal is output with “24-BIT

COLOR” automatically. However, since the transmission clock of ”30-BIT COLOR” is faster than that of

“24-BIT COLOR”, noise may occur if a bad-quality cable or long cable is connected. In those cases, the noise

may be removed by selecting”24-BIT COLOR”.

When the MSD outputs at WQHD (2560 x 1440) / WQXGA (2560x1600) / 4K (3840 x 2160) / 4K (4096 x

2160), the color depth is “24-BIT COLOR”.

9.7.10 CEC connection

Menu Top

→

OUTPUT SETTING

→

CEC CONNECTION

Setting for Each output channel

Setting value

・

NOT CONNECTED [Default]

・

SELECTED CHANNEL

・

IN1 to IN7

You can set which I/O to be connected when a device supporting CEC is connected.

The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the

MENU/SET key to update the setting.

Notes:

・

Using CEC may cause negative effects. If you do not use CEC, set this menu to “NOT CONNECTED”. If the

status of the sink devices connected to the HDMI output connector changes (such as being turned OFF

→

ON) or if the CEC connection changes, the EDID may also need to be changed (the MSD changes it

automatically) in order to update the address of the connected device. When the EDID is changed, the

source device stops outputting video temporarily. Note the following points to not make the EDID change at

the time of operation.

・

IN8 and IN9: CEC is not supported.

・

CEC connection is a one-on-one basis; it cannot connect multiple inputs and outputs. If you set multiple

outputs to connect to the same input, only a smaller output number is connected preferentially and other

outputs are not connected.

Содержание MSD-72 Series























































































































































Результаты поиска

Содержание MSD-72 Series

Отзывы:

Похожие инструкции для MSD-72 Series

Бренды по названию

Популярные бренды

IDK MSD-72 Series, Руководство пользователя

Результаты поиска

Содержание MSD-72 Series

Отзывы:

Похожие инструкции для MSD-72 Series

Бренды по названию

Популярные бренды