IDK MSD-72 Series, Руководство пользователя

Страница: 69 / 150

MSD-72 Series User’s Guide
69
9.6.2 The total number of horizontal dots
Menu Top
→
INPUT TIMING
→
H TOTAL DOTS
Setting for Each input channel, each input signal (only analog input signal)
Setting value 400DOT to 4125DOT [Default] varies depending on the input signal.
You can set the total number of horizontal dots of analog RGB/analog YPbPr input video.
The settable values vary depending on the input signal. If interlace signal are input, the sampling clock
(Holizontal shyncronized frequency x the total number of holizontal dots) must be within 13 MHz to 81 MHz.
If non-interlace signal are input, the sampling clock must be within 13 MHz to 162 MHz.
If other signal is input, the total number only can be displayed but not set.
If there is no input signal on the input channel it shows “NOT AVAILABLE NOW” on the front VFD screen.
9.6.3 Start position
Menu Top
→
INPUT TIMING
→
H START (Horizontal) / V START (Vertical)
Setting for Each input channel, each input signal
Setting value [Table 9.5] Setings of start position
[Table 9.5] Setings of start position
Function Setting value
Horizontal start position 64DOT to 2900DOT
(The total number of horizontal dots
－
Horizontal active area or less)
Vertical start position 10LINE to 2048LINE
(The total number of vertical lines
－
Vertical active area or less)
[Default] varies depending on the input signal.
You can set the horizontal/vertical starting position.
Setting value must be as follows. If the set value exceeds the value, the starting position will be set the limit
value within the settable range automatically.
Horizontal : The total number of horizontal dots > Horizontal active area > Horizontal starting position
Vertical : The total number of vertical lines > Vertical active area > Vertical starting position
If there is no input signal on the input channel it shows “NOT AVAILABLE NOW” on the front VFD screen.