MSD-62 Series User’s Guide
87
9.8.4 Active area
Menu Top
→
INPUT TIMING
→
H DISPLAY (Horizontal) / V DISPLAY (Vertical)
Setting for Each input channel, each input signal
Setting value [Table 9.9] Settings of active area
[Table 9.10] Settings of active area
Function
Setting value
Horizontal active area
64DOT to 2900DOT (The total number of horizontal dots
－
64 or less)
Vertical active area
10LINE to 2048LINE (The total number of vertical lines
－
10 or less)
[Default] varies depending on the input signal.
You can set the horizontal/vertical active area of input video.
The horizontal setting value must be [The total number of horizontal dots > Horizontal active area]. If the set
value exceeds the limit value by changing the total number of horizontal dots, the horizontal active area will be
set to the limit value within the set range automatically.
If 4K video signals are input, only the active area will be displayed; the value cannot be set.
If there is no input signal on the input channel it shows “NOT AVAILABLE NOW” on the front VFD screen.
