MSD-62 Series User’s Guide
131
9.15.3 Editing cross point
Menu Top
→
PRESET MEMORY
→
EDIT CROSS POINT
Setting for Each cross point memory
Setting value [Table 9.32] Editing cross point
[Table 9.32] Editing cross point
Setting item
Setting value
Default
Output channel (OUT)
1 to 2
-*
Video input channel (V)
--- (Not control), 1 to 8, OFF
---
Audio input channel (A)
--- (Not control), 1 to 8, OFF
---
Memory name (NAME)
20 to 7D of ASCII code
20 (space)
**Setting input channels of video and audio for each output channel
You can edit the cross point memory setting.
First, select the memory number and press the MENU/SET key, and then edit the desired setting.
Press the MENU/SET key to apply the setting.
■
Not controlling channel
If you select “---” when setting input channel of V or A, channels are not controlled.
Outputs that are set not to be controlled are not switched when cross point memory is loaded.
OUT1 = Input channel1
OUT2 = Input channel2
Current input setting
OUT1 = Input channel3
OUT2 = Not control (---)
Current setting of cross point memory1
Loading
OUT1 = Input channel3
OUT2 = Input channel2
Input setting after loading cross point memory
Setting is not changed.
[Fig. 9.29] Loading edited cross point memory
9.15.4 Recalling all settings
Menu Top
→
PRESET MEMORY
→
LOAD ALL SETTING
Setting value No.1 to No.12
You can recall all settings saved in the preset memory.
Once you perform this operation, all settings related to video and audio I/O except for some environmental
settings will be updated. Operate this menu with great attention.
This menu is not displayed if setting is not saved in memory.
Setting examples of video combination mode are stored in No.10 to No.12 by default. Settings of normal
mode are stored in No.9.
Press the MENU/SET key to apply the setting.
