MSD-402 User’s Guide
113
Item
Description
General
AC Adapter
Input: 100 - 240 VAC ± 10%, 50 Hz / 60 Hz ± 3 Hz
Output: DC 12 V 3 A (A dedicated AC adapter is provided.)
Power consumption
About 29 Watts
Dimensions
8.3 × 1.7 × 9.8” (210 (W) × 44 (H) × 250 (D) mm)
(EIA 1U high, half rack wide) (Excluding connectors and the like)
Weight
4.2 lbs. (1.9 kg)
Temperature
Operating: 32 °F to 104 °F / 0 °C to +40 °C
Storage: -4 °F to +176 °F / -20 °C to +80 °C
Humidity
Operating / Storage humidity: 20% to 90% (Non Condensing)
*1
30 bit/pixel (10 bit/component) Deep Color is supported while xvYCC, Lip Sync, 3D, ARC and HEC are not supported.
*2
Only HDBaseT output does not support HDCP-compliant DVI signals.
*3
RJ-45 (HDBaseT connector) is only for Cat5e / Cat6 twisted pair cable. Please do not use it for LAN devices or the like.
*4
T568A or T568B straight. For transmission longer than 164 ft. (50 m), Cat6 UTP/STP cable is recommended.
*5
The maximum cable distance varies depending on the connected devices and was measured under following conditions:
・
1080p@60: when IDK’s AW G 24 cable was used and signals of 1080p@60 24 bit / pixel (8 bit / component) was input or output.
The extension distance may not be extended with some device combinations, cabling method, or other manufacturer’s cable. Video may be disturbed or may not be output even if
signals are within the range mentioned above.
*6
The maximum extension distance was obtained when IDK’s CAT.5E HDC cable was used. The distance may not be extended with some device combinations, cabling method, or
other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above. Operations may not be stable with some LCD
devices; please check the operation beforehand or contact us. The maximum extension distance is the shorter distance of connected HDBaseT product or sink device’s
maximum extension distance.
*7
Seamless switching with a black frame.
*8
The Anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow
noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
*9
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the
Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were
physically disconnected and reconnected. This feature only works for the MSD’s output. If other devices are connected between the MSD’s output and sink device, this feature
may be invalid.
