IDK MSD-402, Руководство пользователя

Страница: 87 / 120

MSD-402 User’s Guide
87
8.12.3 Editing crosspoint
Menu PRESET MEMORY
→
EDIT CROSS POINT
Setting for Each crosspoint memory
Setting value [Table 8.18] Editing items of crosspoint
[Table 8.18] Editing items of crosspoint
Setting item Setting value Default
Memory name (NAME) 20 to 7D of ASCII code 20 (space)
Input channel
(Each output channel)
---, 1 to 4, OFF ---
You can edit the crosspoint memory settings.
Select the memory number you want to edit and edit the settings above in [Table 8.18] Editing items of
crosspoint . Up to 10 characters can be registered for memory name.
Click the “SAVE” button to open the dialog box and click the “OK” button to save the crosspoint memory.
■
Not controlling channels or PinP outputs
”---”: If you select “---” when setting input channel or PinP ouput, it is set to “not control”.
Outputs which are set to “not control”: ON / OFF status of channels or PinP output cannot be switched
when crossspoint memory is loaded.
OUT1 = Input channel1
OUT2 = Input channel2
Current input setting
OUT1 = Input channel3
OUT2 = Not control (---)
Current setting of cross point memory1
Loading
OUT1 = Input channel3
OUT2 = Input channel2
Input setting after loading cross point memory
Setting is not changed.
[Figure 8.36] Loading edited crosspoint memory
8.12.4 Loading all settings
Menu PRESET MEMORY
→
LOAD ALL SETTING
Setting value No.01 to No.16
You can load all settings saved in the preset memory.
Once you perform this operation, settings related to video and audio I/O except for some environmental
settings will be updated.
For factory default settings and settings that are not saved, this menu cannot be selected.
Click the “LOAD” button to open the dialog box and click the “OK” button to load settings.
【
See: 8.12.5 Saving all settings
】