MSD-402 User’s Guide
57
8.7.1 The total number of horizontal dots
Menu INPUT TIMING
→
H TOTAL DOTS
Setting for Each input channel, each input signal
Setting value 400DOT to 4125DOT [Default] varies depending on the input signal.
You can check the total number of horizontal dots. This menu is only for displaying but not setting.
For channels that do not have input signal, the message is displayed instead of the total number of horizontal
dots.
8.7.2 Start position
Menu INPUT TIMING
→
START POSITION
Setting for Each input channel, each input signal
[Table 8.6] Settings of start position
[Table 8.6] Settings of start position
Function
Setting value
Horizontal start position
64DOT to 2900DOT
(The total number of horizontal dots
－
Horizontal active area or less)
Vertical start position
10LINE to 2048LINE
(The total number of vertical lines
－
Vertical active area or less)
[Default] varies depending on the input signal.
You can set the horizontal/vertical starting position.
Setting value must be as follows. If the set value exceeds the value, the starting position will be set the limit
value within the settable range automatically.
Horizontal : The total number of horizontal dots > Horizontal active area > Horizontal starting position
Vertical
: The total number of vertical lines > Vertical active area > Vertical starting position
You can set the horizontal/vertical starting position if there is no input signal.
