MSD-402 User’s Guide
16
6 Precautions
Before connecting to external devices, follow the precautions below.
6.1 Attaching rubber feet
Clean up the MSD main unit, and then attach the provided rubber feet to the bottom four corners of the MSD.
6.2 Installation
When installing the MSD, please observe the following precautions.
・
Do not place the MSD on top of another MSD.
・
Do not block vent holes. Please secure the space above ambient 30 mm/1.18 inches.
・
Do not install the MSD to an enclosed space. When the MSD needs to be installed to EIA rack mount or
an enclosed space, please prepare ventilating equipment to keep the ambient temperature at 40 degrees
C/104 degrees F or less. If inadequately vented, the life of parts may be shortened and operations may be
affected.
