Part 2 - Configuration
29
●
Import: Decide whether to import network settings
as well. If you do not wish to change the current
network settings, do not select Include Network
Setup.
Selecting Setup Import does not change the settings
below.
•
Time-related settings (Date/Time, Time Zone, and
Use Daylight Saving Time)
•
Camera-related Advanced Settings settings
•
Camera-related Stream settings (Only if the
resolution is different from the camera in exporting)
●
Export: Exports the current system settings to a
storage device connected to the system’s USB port or
the registered FTP site in NetFS. You can designate a
File Name for the export file.
For USB flash memory devices, the NVR supports the
FAT32 file format only.
●
Show System Log: Displays a searchable list of 5,000
most recent system log entries. For more information
on types of system log entries, refer to the System
Log Types in the installation manual. The
icon
appears next to log entries originating from a remote
source. To export the system log, select the Export
at the bottom of the screen and then designate a file
name.
In order to display the system_log.txt file, you must
use the correct character encoding settings and use a
fixed-width font.
●
Clear All Data: Erases all recording data. Selecting
Clear All Data displays a confirmation window. Select
Clear to proceed.
•
Before you perform Clear All Data, make sure you
are not accidentally deleting important data. Erased
data cannot be recovered.
•
Clear All Data does not affect the system log.
Instead, the Clear All Data event will be added to
the log.
●
System Shutdown: Shuts down the system. When
prompted, select System Shutdown.
The system will restart after changing the channel
mode.
