Part 1 - Getting Started
22
Zoom
Press the ZOOM button on the remote control or right-
click on the mouse to select a channel you wish to zoom
in on while in live mode or time-lapse mode. When a
zoom frame appears on the selected channel, right-click
on the mouse or press the Enter button to zoom in. Use
the arrow buttons to position the frame. When Zoom
is activated,
icon is on the status bar located on the
upper right corner of the system.
•
In Full Screen mode, activating Zoom automatically
selects the current channel.
•
To restore the channel to normal size, press the
Zoom button again.
PTZ Control
While in Live mode, right-click and select PTZ from the
context menu or press the PTZ button on the remote
control to display the PTZ camera selection window.
Select the camera you wish to control. The
icon will
begin to flash on the selected camera’s OSD window.
Use the Arrow buttons to pan and tilt the camera up,
down, left, and right.
You can also change the direction by dragging on the
mouse.
Also, it’s possible to use the mouse wheel to zoom in/
out.
•
Logging in with an account that has PTZ Control
Authority is necessary in order to control PTZ
cameras.
•
A message will prompt if there is no PTZ camera
displayed on the Live screen.
•
Zoom in/out and shift focus using the PTZ Control
(ZOOM, FOCUS) buttons on the remote control.
•
To exit PTZ mode, press the PTZ button again.
Setting Up a PTZ Preset
While in PTZ mode, select the VIEW button on the
remote control to display the Set Preset window and
assign the current position as a preset.
While in PTZ mode, select the SAVE button on the
remote control to display the Move to Preset window.
Select a preset to move the current PTZ camera to the
selected preset’s position.
