Part 1 - Getting Started
11
Network Wizard
After exiting from Quick Wizard, the network with
Network Wizard will start automatically.
1
Select Network Wizard.
2
Specify whether the system is connected to the
Internet and click Next.
If you have chosen No, wait for the test to finish
and then click Finish to exit Network Wizard.
3
Select Network Configuration and then click
Next. Select either Auto Configuration or Manual
Configuration and then click Test to test the system’s
current network configuration.
•
This test must be performed before proceeding
to the next step.
•
If the NVR is on a network connected to a
network that has a DHCP server, selecting Auto
Configuration retrieves LAN settings such as
IP and DNS addresses automatically. Selecting
Manual Configuration, on the other hand, lets
you specify the settings manually.
•
UPnP support device not found. If this error
message is displayed, check to see if the IP
router (or NAT) supports UPnP and if UPnP has
been enabled. For more information about the
router's UPnP function, refer to the router's
operation manual.
